Skip to content
Go to harvesteye.com
  • There are no suggestions because the search field is empty.

How can I calibrate my camera to the new environment?

The cameras calibration can be checked with the calibration card by going into "Settings" -> "Calibration" -> "Calibrate".

Once the system has been installed on a harvester or grader or used for the first time as a handheld, the cameras calibration needs to be checked. Doing this, it will proivde the system insights into the health of the sensors. 

The cameras calibration can be checked through the tablet by following the steps below:

  1. Place the red and black checkerboard card that came with the system on the belt, directly beneath the camera.
  2. On the home page, click "Settings" -> "Calibration" -> "Calibrate". Once this button is pressed, the system will display measurements on the screen. These measurements are automatically uploaded to the cloud. No further action is required.

Note: This check only needs to be done once per year - before the first use of the system each season or if the system is moved from one location to another (for instance, from harvester to a grader). It is not required every time the system is used.